Clement – Impressions Growth Charts|Baby Memories>FRENCH Modern Growth Chart – White

The set of personalized sticky labels Clément becomes your best ally for the quick identification of your family’s personal items. In a few seconds, young and old will be able to recognize their school items, lunchbox items, sports equipment, shoes, clothes, etc. Waterproof and durable, the labels are not afraid of freezing, water, heat, or steam. They are resistant to the microwave, refrigerator, freezer, dishwasher, washing machine, and dryer.

MODEL AVAILABLE IN FRENCH ONLY

DIMENSIONS
– Total height of the mural once installed at 6 inches from the floor: 48.5 inches (145 cm)
– Width of the mural once installed: 10 inches (25 cm)
– The growth chart and all decorative elements are delivered on three sheets of self-adhesive vinyl, each 27 x 12 inches (69 x 30 cm), rolled in a sturdy cardboard box.

MATERIAL
– Textured matte vinyl with non-permanent and repositionable adhesive.
– Can be applied to most painted walls. A minimum of 4 weeks must be allowed before installing the stickers on a freshly painted wall. The surface must be smooth, clean, and completely dry. Adhesion is not guaranteed on unfinished wood, brick, wallpaper, or textured faux finishes.
– Unused stickers should be stored at normal room temperature (between 15° and 25°C), at a relative humidity of approximately 50%.
– The growth chart can be kept as a souvenir once removed from the wall. To do this, be sure to keep the backing paper so you can reapply the stickers.

USER GUIDE
1 – The upper limit of the growth chart should be installed 58 inches from the floor. Before beginning installation, discreetly mark the location where the sticker will be installed; use a measuring tape firmly pressed to the floor and a pencil.
2 – To install, your hands must be clean and dry.
3 – The growth chart should be installed from top to bottom; Start with sheet #1/3.
4 – Peel approximately 4 inches (10 cm) of the sticker from the backing paper, avoiding the sticky backing to maximize adhesion. Gently press the sticker against the surface for better adhesion.
5 – Slowly pull the backing paper downward with one hand while simultaneously rubbing the sticker with the other. To smooth it out and remove any air bubbles, gently move from the center outward.
6 – When installing sheet #2/3, repeat step 4, making sure to align the bottom line of sticker #1/3 with the top line of sticker #2/3.

The wall stickers can be removed without leaving any residue or damaging the paint. They can be reused if handled with care, kept away from dust, and reapplied to a clean, suitable surface.

COLORS
– Printed with high-quality, non-toxic inks.
– However, excessive rubbing may alter the printed colors.
– Colors appear differently from one screen to another; the colors shown are for representative purposes only and may vary slightly from the printed result.

WARNING!
This product is not a toy: do not allow children under 3 years of age to handle the stickers unsupervised to avoid the risk of swallowing.

Conceived, designed, and manufactured in Quebec City